Miyota Caliber 9019 Watch Movement

Manufacturer	Miyota
Caliber Number	9019
Base Caliber	Miyota 9015
Movement Type	Automatic, self-winding mechanical
Linges	11.5’’’
Diameter	26mm
Height	3.9mm
Jewels	24
Beat Rate	28,800 bph, 4Hz
Power Reserve	~42 hours
Lift Angle	51 degree
Accuracy Rating	See below…
Hacking Seconds?	Yes
Hand-Windable?	Yes
Hand Winding Direction	Clockwise
Rotor Winding Direction	Clockwise (unidirectional)
Anti-Shock System	Parashock
Stem Part #	065-A05
Hand Count	3
Functions	Central hours; central minutes; central sweeping seconds; date at 3:00
Country of Manufacture	Japan
Known Brands	Traska Commuter (Add your watch to the comments below…)

The Miyota caliber 9019 is a 24 jewels 3-hand automatic movement based on the 9 series framework. Miyota categorized this caliber as part of the “Premium” line of automatic movements. This is an in-house (Citizen owns Miyota) movement, made in Japan.

Some of the topics covered in this caliber listing:

Miyota 9019 VS 9015:

The caliber 9019 is basically a 9015 but with a lower clearance for the hands. It has the same thickness of 3.9mm, but the ability to install the hands closer to the dial allows for an overall thinner watch design. In measurement, the difference is 1,750μ vs 2,100μ.

These two calibers are so similar that Miyota doesn’t even bother to show an image of an actual 9019 in their catalog – they show the 9015 on the 9019 page.

Accuracy:

Miyota claims that the accuracy of the caliber 9019 averages between -10 and +30 seconds per day under normal temperatures and operating conditions.

Power Reserve:

To get the best accuracy and performance out of your 9019 powered watch, you will want to make sure your watch is fully wound. When manually winding the crown, it takes 40 winds to reach full power reserve. A full power reserve gives a running time of about 42 hours.

Setting the Time:

The 9019 has 3 crown positions: against the case (manual winding), pulled out one click (date setting mode), pulled out 2 clicks (time setting mode). Note: Miyota states that the date should not be set between 8:30PM to 2AM.

Additional Resources: