Manufacturer | Tudor |
Caliber Number | T603 |
Base Caliber | Sellita |
Movement Type | Automatic, self-winding mechanical |
In-House? | No |
COSC? | Not enough info |
Diameter | 33.3mm |
Thickness | 5.5mm |
Jewels | 25 |
Vibrations Per Hour | 28,800 bph (4 Hz) |
Lift Angle | 50 degrees (as per Sellita) |
Power Reserve | 38 hours |
Rotor | Ball bearing |
Barrel Spring | Nivaflex |
Hacking? | Yes |
Hand-winding? | Yes |
Functions | Hours, minutes, central sweeping seconds, day of the week at 12:00, date at 3:00 |
Country of Manufacture | Switzerland |
Known Models | Tudor Royal (Model reference numbers and configuration options are below…) |
The Tudor caliber T603 is a Swiss made automatic movement found in Tudor Royal watches. This caliber is powers the larger 41mm Day/Date Royal models. Watches with this movement were announced in 2020.
Some of the topics covered in this caliber listing:
Tudor made by Sellita:
The Tudor T603 is based on a Sellita caliber. You may see other sites incorrectly list the T603 as being based on a Sellita 2834. There is no such thing as a Sellita 2834. There is an ETA 2834-2 which the Sellita SW240-1 is a clone of. Therefore, it is safe to assume that the T603 is based on the Sellita caliber SW240-1, making it a clone of a clone.
Interestingly, the Tudor documentation lists the T603 as having 25 jewels, however, the Sellita caliber SW240-1 actually contains 26 jewels (one extra jewels when compared to the ETA 2834-2, much like the difference between an SW200-1 and ETA 2824-2).
Other discrepancies between Tudor and Sellita info include the diameter. Tudor lists a diameter of 33.3mm, whereas Sellita lists 29.4mm diameter (with a 29mm case fitting diameter). Also, thickness: Tudor says 5.5mm, Sellita says 5.05mm.
If you want to dig deeper into the background of the T603, the SW240-1 is based on the SW200-1 with an additional outer day of the week complication. Learn more about the SW200-1 here.
Is it an officially certified chronometer?
Although Tudor does not write “Chronometer” across the dial of the Royal, their official marketing says this about the movement inside:
“Swiss self-winding mechanical calibre T603 with chronometer performance”
So does “chronometer performance” means is it an officially certified chronometer or not? This sounds like they are claiming a chronometer-like timekeeping experience, without an actual chronometer certification to go along with it. If this is the case, it could be that they are using a Premium (Top) grade Sellita which runs close to COSC spec but without the official certification.
Sellita’s Premium grade is tested in 5 positions and tests out at an average of +/- 4 seconds per day with a maximum divergence of 15 seconds/day. For COSC, the movement must keep time within an average rate of -4/+6 seconds per day over the span of testing (at least 15 days).
When should the Day/Date change?
Tudor officially states that the day of the week at 12:00 and date at 3:00 are “semi-instantaneous”. You will likely not notice any delay of the day/date changing over at midnight, but don’t be surprised if the advancing changeover occurs slightly before or after the hands strike 12:00 AM.
Recommended Service Intervals:
Tudor recommends that its watches be serviced approximately every 10 years depending on the model and real-life usage.
Caliber T603 Warranty:
Watches powered by the Tudor caliber T603 movement are covered by a 5 year manufacturer’s warranty. Actually, Tudor calls it a “guarantee” rather than a warranty. Tudor clearly states that this guarantee is transferable, so when you purchase a pre-owned watch or sell your watch, it will still be covered within five years from the original date of purchase. Tudor also states that no registration is necessary for coverage, nor are periodic maintenance checks.
List of Tudor watches with caliber T603:
As of this post, the T603 movement is found in the following 12 Tudor Royal watch configurations…
Reference | Dial | Case/Bracelet |
M28600-0001 | Silver | All steel |
M28600-0002 | Silver with diamonds | All steel |
M28600-0003 | Black | All steel |
M28600-0004 | Black with diamonds | All steel |
M28600-0005 | Blue | All steel |
M28600-0006 | Blue with diamonds | All steel |
m28603-0001 | Silver | Steel, yellow gold TT |
m28603-0002 | Silver with diamonds | Steel, yellow gold TT |
m28603-0003 | Black | Steel, yellow gold TT |
m28603-0004 | Champagne | Steel, yellow gold TT |
m28603-0005 | Black with diamonds | Steel, yellow gold TT |
m28603-0006 | Champagne with diamonds | Steel, yellow gold TT |
All watches with the caliber T603 are 41mm diameter.
Retail prices range from $2,325 to $3,975 USD depending on configuration.
Editor comment: It looks like someone at Tudor messed up the flow of reference numbers. The watches were in order of dial color and dial color with diamonds, but when it gets to the two-tone models with black or champagne dials, the sequence is out of order.
Examples of watches with this movement:
Additional Resources:
Recent Comments
Militado got this movement
Henry Archer Vesterhav. Mine is running at +2 sec/day. I do wish that the movement…
Step 1) Set the time correctly. Step 2) Wait 24 hours. Step 3) Compare the…
The wonderfully underrated Festina Automatic Skeleton (20632/1) also uses this movement. It keeps time better…
17 is the grout number. ST1701 is the specific automatic calibre and ST1700 the manual…
Duzu Watches of Western Australia use this movement in their DW-D3 diver range