Manufacturer | Sellita |
Caliber Number | SW330, SW330-1 |
Base Caliber | Sellita SW300-1 |
Lignes | 11.5”’ |
Diameter | 26.20mm |
Casing Diameter | 25.60mm |
Thickness | 4.10mm |
Vibrations Per Hour | 28,800 bph, 4Hz |
Jewels | 25 |
Lift Angle | 51 degrees |
Amplitude Range | 200 – 315 degrees |
Power Reserve | 42 hours |
Hacking? | Yes |
Quick Date? | Yes |
Anti-Shock | Incabloc |
Spring | Nivatronic, Nivaflex NM |
Balance Wheel | Nickel or Glucydur |
Main Plate Material | Brass |
Bridges Material | Brass |
Functions | Hours, minutes, central seconds, central GMT hand, date at 3:00 |
Country of Manufacture | Switzerland |
Known Models | Bravur Geography, Monta Atlas, Muhle Glashutte Seebataillon GMT, Bamford London GMT, Farer Oxley, Farer Lander III, Dufrane City Limits GMT, Steinhart GMT-Ocean, Zahnd & Kormann No. 2 GMT (Please add yours to the comments below…) |
The Sellita SW510 is an automatic chronograph watch movement.
Replacement Prices:
At the time of this post, replacement prices were found online for around $480.00 USD.
Additional Resources:
- Sellita’s official SW330-1 tech sheet here
Trending Comments
ALTO Caliber A01
One of the coolest looking movements I've seen in a long time!
ALTO Caliber A01
What's with these prices. It's 20k and has the same regulating system in my $500…
Sunon Caliber PE11
Sunon is a part of GUANGZHOU Pearl Time Group, PE11 is the only repairable movement…
ETA Caliber 2824-2
Hi Craig, that would be the hour wheel. Tech sheets were added to the caliber…
Miyota Caliber 2115
Found in the Aviator branded Special OPS AVW78341G350. It ticks along with +2 sec./month, thats…
Active Caliber Listings
It seems that Oris has released version 2 (Cal 400-2) of this caliber, to address…
Question: What are actual experiences about reliability? I have a few ST19 watches in a…
So I can now update I took ownership of my Reverse Panda Glassbox 4 days…
The info from Seiko near the top of this thread says parts not 'convertible' -…
More like saying, my Ferrari-which I had to get their permission to buy-has to be…