Android Euxine 45 (add your watch to the comments below…)
The Miyota caliber 2353 is a 0 jewel quartz movement. This caliber is made in Japan.
Some of the topics covered in this caliber listing:
2353 Accuracy Rating:
Miyota states the accuracy of this movement to be +/-20 seconds/month.
The caliber 2353 takes an SR626SW watch battery. The battery is said to last up to 3 years. There is a battery saving (aka hacking) mode by pulling out the stem into time setting mode (position II). When doing this, the seconds hand will stop and the power consumption will be limited.
Changing the Battery
Below is a quick guide to performing a DIY battery change on your 2353 powered watch. It’s easy enough. If it is your first time changing a battery on a Miyota quartz movement, just take your time. The arm with the hole in it is what holds the battery in. It moves slightly to release the battery. When installed a new cell, hold the arm out of the way and simply wedge the new battery under the tab on the left, press down on the battery and bring the arm back over. The arm has a spring-like resistance and should return to place on its own, as long as the battery is in place and not blocking it. Try not to slip the tool and scratch the coil. (Picture below is from a similar caliber)
At the time of this post replacement prices for the cal. 2353 were found online in the range of $5.67 – 9.95 USD.