Manufacturer | Westclox |
Grade |
Bull’s Eye |
Movement Type | Mechanical, manual-wind, pin-pallet |
Jewel Count |
0 |
Lift Angle |
Unconfirmed |
Power Reserve |
30 hours |
Anti-Shock Device |
No |
Regulator? |
Yes |
Plastic Parts? |
Yes (but not all) |
Hand Count | 2 |
Functions | Central hours; central minutes; small seconds subdial on models until the mid 1970s |
Hacking Seconds? |
No |
Country of Manufacture | Made in USA |
Known Models |
Westclox Bull’s Eye (Add your watch to the comments below…) |
The Westclox Bull’s Eye pocket watch is powered by an American-made handwound movement. These watches were known as Dollar Watches and intended to be affordable and obtainable for everybody. Westclox was a division of General Time Corporation at one point.
Early models had a small seconds hand, but it is more common to find 2-hander versions with no seconds.
The Bull’s Eye model was introduced in circa 1929, with production continuing into the 1980s (Westclox as a brand produced pocket watches until the 1990s).
While the Westclox Bull’s Eye movements don’t exactly have a grade or caliber number, the “Bull’s Eye” is essentially the grade. Some of the timepieces were stamped with model numbers, such as 90001, 40309, 40009, etc. If you have a watch with a different model number, please comment below…
You may also find a random double digit number, which is apparently not a serial number. Into the 1960s, Westclox was stamping what some collectors believe to be production dates on the movements. If you find a number, it’s likely referring to date/year it was produced.
While you may be able to service your Bullseye watch, these pieces were not intended to be repairable. In fact, attempting to do so often leads to more damage because of the riveted construction.
However, your first step to repairs will likely be to remove the crown and stem. As easy as this is, the design is not exactly straightforward the first time around. View: DIY: How To Remove Crown and Stem from Westclox Bull’s Eye Dollar Pocket Watch
Bull’s Eye FAQs:
Can you overwind it?
Yes.
Video – 1964 Westclox Bull’s-Eye disassembly:
Video – Westclox Bull’s Eye Pocket Watch Movement /1963 / Dollar Watch:
Additional Resources:
Recent Comments
Avi8 bell x1 machbuster chronograph appears to use this movement
Its pretty much the same as the 3135, it is to raise or lower the…
I purchased a CRONOS dive watch, well made nice finishing with the PT5000 movement. The…
the more watches with SW200-1 , the most spare parts for servicing this Caliber after…
CWC is using the no date F06.402 now in their brandnew Ti300 (from April 2025)
Eterna 1935 8790.41 is using this movement and calling it Eterna Kaliber 176
Also HUGO Boss 1100 Metropolis (swiss made) Tank Watch from ca. 2007 is using this…