Brand | Bulgari, Bvlgari |
Caliber Number | 220 |
Base Caliber |
ETA 2892-A2 |
Movement Type | Automatic |
Jewels | 21 |
Diameter | 11 1/2”’ (25.60mm) |
Height | 3.6mm |
Power Reserve | 42 hours |
Lift Angle | 51 degrees |
Vibrations Per Hour | 28,800 (4 Hz) |
Shock System | Incabloc |
Regulator System | ETACHRON |
Rotor | Ball bearing system |
Winding Direction | Bi-directional |
Hacking? | Yes |
Features | Hours, minutes, central seconds, date |
Country of Manufacture | Switzerland |
Known Models | Bulgari Diagono (ref: LCV 38 S) |
The Bulgari caliber 220 is based on the ETA caliber 2892-A2 automatic watch movement. The movement shown here was found in a Bvlgari Diagono watch here. The caliber has been redecorated by Bulgari, most notably the branded rotor.
The thin 3.6mm caliber 2892-A2 allows for this model to be an overall 10mm tall after casing and crystal is installed.
Not Signed ETA
Neither the ETA logo or 2892-A2 numbers are not stamped on the movement.The engravings on the movement are as follows:
- Swiss / Twenty One / 21 Jewels
- 220 / TEEM
- V8ZB6
- Serial Number
Examples of watches with this caliber
Extra Information
- Other calibers based on the ETA 2892 here
Please share your experiences and thoughts about the Bulgari caliber 220 in the comments section below…
Trending Comments
Sellita Caliber SW200 VS SW200-1
Wow man, you should join the R0l3X club, they're desperately looking for new members, but…
Sellita Caliber SW200 VS SW200-1
Basically you are saying that one of the world's most used workhorse movements is complete…
Seiko Caliber 6N52
Thank you for sharing with the community.
Hangzhou Caliber 6460
One more update. I had a watchmaker regulate it 3 weeks ago. I wanted to…
ETA Caliber C07.XXX
I can confirm that the escape wheel from a standard 2824-2 movement is NOT interchangeable…
Active Caliber Listings
Tengo un mondaine big date que al cambiarle la baterĂa dejo de funcionar la verdad…
Hi Joe, sounds like they were just back-ratcheting while manually winding. As for the rotor,…
"The rotor winds in both directions to reduce winding time." I've seen a video showcasing…
I looked at a 2007-2009 M832118 When I went to set the time clockwise rotation…
How's that accuracy holding up now? Going to pick up my Reverse Panda next month,…