Brand | Felsa |
Caliber Number | 465 |
Movement Type | Manual wind, mechanical |
Diameter | 11.5”’ (25.65mm) |
Height | 4.7mm |
Jewels | 17 |
Lift Angle | 52 degrees |
Power Reserve | 38 hours |
Vibrations Per Hour | 18,000 bph |
Anti-Shock | Incabloc |
Hairspring | Flat |
Balance Staff | U1396 |
Hands | 1.50 / 0.90 / 0.22 |
Features | Hours, minutes, sweeping central seconds |
Country of Manufacture | Switzerland |
Production Years | 1950s |
Known Models | Please add yours to comments below… |
The Felsa caliber 465 was introduced in circa 1950s. You will often see this movement rebranded under other watch company names, but the “F” logo and caliber number can still be found. For example the movement pictured was found in a vintage Titus dress watch and signed Titus Watch Co.
In a post by a user on WUS:
“The Felsa 465 was a movement of the 50s and mounted into a lot of watches. The “quality version”, if I may say so, had a screw balance. With 11 1/2 lines it belonged to the larger movements those times, Another feature of the 465 was the long regulator arm.”
There is another variation of this movement known as the caliber 472. The primary difference is the addition of a calendar complication.
Please share your experiences and thoughts about the caliber 465 in the comments section below…
Caliber submitted by wahawatches.com
Trending Comments
Sellita Caliber SW200 VS SW200-1
Wow man, you should join the R0l3X club, they're desperately looking for new members, but…
Sellita Caliber SW200 VS SW200-1
Basically you are saying that one of the world's most used workhorse movements is complete…
Seagull Caliber ST1902
I assembled Speedmaster homage with that movement a couple weeks ago and tonight I am…
TAG Heuer Caliber TH20-00
How's that accuracy holding up now? Going to pick up my Reverse Panda next month,…
Seiko Caliber 7S26
Dont need to call the seller a fraud but just plain ignorant. The 7s26 always…
Active Caliber Listings
Tengo un mondaine big date que al cambiarle la baterĂa dejo de funcionar la verdad…
Hi Joe, sounds like they were just back-ratcheting while manually winding. As for the rotor,…
"The rotor winds in both directions to reduce winding time." I've seen a video showcasing…
I looked at a 2007-2009 M832118 When I went to set the time clockwise rotation…
How's that accuracy holding up now? Going to pick up my Reverse Panda next month,…