| Manufacturer | Sellita |
| Caliber Number | SW510 M BH b |
| Base Caliber | SW510 M |
| Movement Type | Mechanical, manual-wind chronograph |
| Lignes | 13.25”’ |
| Diameter | 30mm |
| Height | 7mm |
| Jewels | 23 |
| Beat Rate | 28,800 bph, 4Hz |
| Lift Angle | 50 degrees |
| Acceptable Amplitude | 200-315 degrees |
| Power Reserve | ~58-63 hours |
| Hacking Seconds? | Yes |
| Quickset Calendar? | Yes |
| Chronograph System | Cam style |
| Anti-Shock Device | Incabloc |
| Mainspring | Niavaflex |
| Hairspring Collet | Nivatronic |
| Hand Count | 5 (depending on variation) |
| Functions | Central hours; central minutes; central chronograph seconds hand; small running seconds at 9:00; 30 minutes chronograph counter at 3:00 |
| Country of Manufacture | Switzerland, Swiss made |
| Known Models | Hanhart Pioneer 417 ES (Add your watch in the comments below…) |
The Sellita Caliber SW510 M BH b is a bi-compax, no-date, manual-wind mechanical watch movement. It is Swiss made with 23 jewels and a beat rate of 28,800vph.
For more information about the SW510 M BH b, please refer to the base caliber page for the SW510 M family of movements here.
Additional Resources:
network of watch sites
Recent Comments
Militado got this movement
Henry Archer Vesterhav. Mine is running at +2 sec/day. I do wish that the movement…
Step 1) Set the time correctly. Step 2) Wait 24 hours. Step 3) Compare the…
The wonderfully underrated Festina Automatic Skeleton (20632/1) also uses this movement. It keeps time better…
17 is the grout number. ST1701 is the specific automatic calibre and ST1700 the manual…
Duzu Watches of Western Australia use this movement in their DW-D3 diver range