Manufacturer | Seiko Time Corp. |
Caliber Number | 5M43, 5M43A |
Movement Type | Kinetic |
In-House | Yes |
Diameter | 27.6mm |
Casing Diameter | 27mm |
Height | 4.3mm |
Jewels | 6 |
Frequency | 32,768 Hz |
Power Supply | Lithium rechargeable battery (watch capacitor) |
Capacitor/Battery Part # | 30235MZ (3023 5MZ, 3023.55MZ) or 30235MY (3023 5MY, 3023.5MY) |
Power Reserve | 6 months on a full charge |
Accuracy | Less than +/-15 sec/month |
Regulator | None |
Driving System | Step motor with load compensated driving pulse |
Hand Count | 3 |
Functions | Central hours; central minutes; central seconds; date-date at 3:00 |
Features | Power reserve indicator via button at 2:00, low battery warning, overcharge prevention |
Country of Manufacture | Made in Japan |
Known Models | (Add your watch to the comments below…) |
Seiko caliber 5M43 (aka 5M43A) is a kinetic movement with a day/date calendar complication. This movement is made in Japan.
Some of the topics covered in this caliber listing:
Power Reserve Indicator:
The power reserve indicator on the cal. 5M43 is not a constant indicator. It requires the wearer to press the button located at 2:00 on the side of the watch.
The power reserve indication is displayed via the seconds hand. Seiko recommends pressing the button when the seconds hand is at 12:00. Some watches will have a power reserve scale printed on the dial, spanning from 12:00 to 6:00 (30 seconds) – by pressing the button when the seconds hand is at 12:00, you can use the scale on the dial more accurately.
Below is a chart with the indications for remaining power reserve:
Low Battery Indicator:
The 5M43 is equipped with a low battery/low power indicator, which presents itself by skipping the seconds hand. The hand will jump every two seconds to let the wearer know the battery is low. This is a 24 hour warning and it means the battery needs charged as soon as possible. To do this, swing the watch back and forth to allow the rotor to wind power into the capacitor.
If you haven’t worn your watch for a long time and it won’t hold a charge no matter how much you swing it or wear it, then it possible the capacitor (rechargeable battery) needs replaced. Although Seiko says these batteries do not require any periodical replacement, they actually do stop working eventually, especially if you haven’t charged the watch for an extended period of time (years).
Replacement Capacitor:
The capacitor part number appears to be 30235MY, replacing the discontinued 30235MZ part number. You may still be able to find the original 30235MZ here.
As with all watch capacitors, this is a friendly reminder that the number engraved on the battery (TC920S for example) is not the caliber-specific battery part number. The Seiko part number has to do with the design and positioning of the metal tabs welded to the back of the battery cell. Learn more here.
5M43 VS 5M42:
There is a similar caliber 5M42A, with the main difference being that the 5M42 only has a date calendar complication whereas the 5M43 being discussed on this page has a day of the week and date. Most of the parts are interchangeable, except for those related to the calendar system.
Additional Resources:
Recent Comments
Very interesting article- thanks! Timex offers the NH35A (Malaysia, TMI) in its Harborside Coast Automatic.…
6309 was discontinued in 1988. The youngest ones are 36 to 37 years old now…
Is this movement, gold plated or brass? Thanks
Hello, you can also find it in the BRISTON Streamliner Skeleton
Swiss Watch Company's TRENCH watch uses this movement.
IMHO the case is comparable to full gold Rolex mass and design wise. The Rolex…
The Maserati is among the best looking (for me) implementations of the NH70A platform. A…