Manufacturer | Slava |
Caliber Number | 2356, S2356 |
Movement Type | Quartz |
Vibrations Per Hour | 18,000 bph |
Jewels | 8 |
Battery | 371 |
Hacking? | Yes |
Functions | Hours, minutes, central seconds |
Country of Manufacture | Russia |
Known Models |
Chaika, Luch, Slava, Uglich, Raketa |
The Slava caliber 2356 was produced in Russia between the 1970’s and up until the 2000’s. This movement was found in a vintage Slava diver with a red star/hammer & sickle on the dial. The dial was stamped Made in USSR as well as the bracelet.
The Slava factory (known originally as the Second Moscow Watch Factory) was the second non-military watch maker established in the Soviet Union, in 1924. -Wikipedia
Supposedly the caliber 2356 was still produced until the 2000’s although this needs to be confirmed in the comments below. If you have one and it appears to be broken, be sure that all of the screws are in place. If one of more of the screws are not in place, the movement may not function.
In the 1990s a lot of Slava movements were exported in China and Hong Kong and can since be found in Chinese production. Some Russian businessmen used them to make fake Slava watches, protecting themselves by changing the logo for “Slava Sozvezdie” (Đ¡Đ»Đ°Đ²Đ° Đ¡Đ¾Đ·Đ²ĐµĐ·Đ´Đ¸Đµ) or CJIABA, even though it still presents trademark infringement. Since 2006 the Slava Sozvezdie watches appear in vast quantities, they contain no Russian content but often marked “Russia” on the dial, and are built as cheaply as possible. These watches have nothing to do with the Slava company and are distributed in Russia only through channels usually associated with fake brand watches. Distributors of such fakes declare that rights were bought for the brand, but the Slava brand wasn’t registered in China and anybody could produce it there. -Wikipedia
Many Russian watch newbs end up searching for “Craba” because that’s it looks like on the dial (CĐ»Đ°Đ²Đ°). You might also find this page if you were searching for Chaika (Seagull) 2356, Luch 2356, Uglich 2356. This movement is stamped S2356. It looks like 52356 but the first character is an S for Slava. You may also find other variations with L2356 (Luch), maybe even with a day/date. Also found in Raketa models.
While Slava watches utilize their own Russian-made movements today, and for some models, bought-in movements from Miyota are used. –Wikipedia
Replacements
You can find vintage watches with this movement for as low as $30, but don’t be surprised if the screws are chopped up and the movement ring is broken. If you take your time, and are willing to pay more, you should be able to find an example in excellent condition.
Crown Removal
We found information that mentioned the caliber 2356 not having a button for removing the crown, which could suggest that you might remove the screw that secures the lever that is circled below. If you follow this method, you must careful to pay attention to how it is assembled for proper reassembly.
According to Michael in the comments below, there is another (albeit safer) method of removing the stem:
The stem is removed by simply sliding the set lever (bottom lever in photo #3) to the side. You may have to pull the crown out to the setting position first, I can’t remember. I would not advise removing the screw securing the clutch lever to remove the stem…
It is advisable to try Michael’s method before removing the clutch lever screw.
This listing needs pics of a better/more complete example. Of you have some originals to spare, please post them in the comments below. Thank you.
Trending Comments
Sellita Caliber SW200 VS SW200-1
Wow man, you should join the R0l3X club, they're desperately looking for new members, but…
Sellita Caliber SW200 VS SW200-1
Basically you are saying that one of the world's most used workhorse movements is complete…
ETA Caliber C07.XXX
I can confirm that the escape wheel from a standard 2824-2 movement is NOT interchangeable…
Seagull Caliber ST1902
I assembled Speedmaster homage with that movement a couple weeks ago and tonight I am…
TAG Heuer Caliber TH20-00
How's that accuracy holding up now? Going to pick up my Reverse Panda next month,…
Active Caliber Listings
Tengo un mondaine big date que al cambiarle la baterĂa dejo de funcionar la verdad…
Hi Joe, sounds like they were just back-ratcheting while manually winding. As for the rotor,…
"The rotor winds in both directions to reduce winding time." I've seen a video showcasing…
I looked at a 2007-2009 M832118 When I went to set the time clockwise rotation…
How's that accuracy holding up now? Going to pick up my Reverse Panda next month,…