Manufacturer | Sellita |
Caliber Number | SW200, SW-200 |
Linges |
11.5”’ |
Diameter |
25.6mm |
Height |
4.60mm thick |
Vibrations Per Hour | 28,800 bph, 4Hz |
Jewels | 26 |
Power Reserve | 38 hours |
Lift Angle |
50 degrees |
Hand Size |
1.50mm / .90mm / .25mm |
Stem |
401/1029 (tap 10) |
Hacking? | Yes |
Hand-Windable? |
Yes |
Quickset Date? | Yes |
Functions | Hours, minutes, central seconds, date (can be at 3, 6, 9, or 12) |
Country of Manufacture | Switzerland |
Known Models |
Too many to list (please add your watch to the comments below…) |
The Sellita caliber SW200 is the main competitor to ETA’s 2824 workhorse movement. Many reputable watch companies are using this movement as an alternative to the ETA mechanism due to it being more economical and readily available. ETA’s threat to limit sales of movements to brands outside of Swatch Group really helped the Sellita option gain in popularity.
Note: Many watch brands incorrectly list their watches as having a Sellita SW200 but in fact they are using the SW200-1. Check your watch to be sure, and check out the SW200-1 caliber listing linked at the bottom of this post.
Some of the topics covered in this caliber listing:
Is it SW200 or SW-200?
You may have seen this movement written as the SW-200 but according to Sellita, the correct way to spell this caliber number is SW200 without a hyphen. Please reference this page when you see folks spelling it incorrectly so that we can dispel confusion in the community.
4 Grades of SW200:
Just like the ETA caliber 2824-2, there are four grades of the SW200 movement:
- Standard – adjusted in two positions; accuracy of +/-12 sec/day up to +/- 30 sec/day
- Special (Elabore) – adjusted in three positions; accuracy of +/-7 sec/day up to +/- 20 sec/day
- Premium (Top) – adjusted in five positions; accuracy of +/-4 sec/day up to +/- 15 sec/day
- Chronometer – COSC criteria
You can learn more about how Sellita grades their movements here.
Differences between SW200 VS SW200-1:
You are looking at the caliber listing for the SW200, but there is a chance that your watch actually has the SW200-1. While extremely similar, they are technically not the same. The -1 is a evolution in the movement and the differences are noted in detail here.
Many brands are listing the incorrect movement in their specs and marketing. The confusion sometimes occurs because many movement manufacturers use -A (Seiko for example) or -1 for the first version of the movement. Sellita’s first iteration is simply SW200, second iteration -1 and so on.
Crown/Stem Removal:
Official Sellita documentation states that the crown should be in the time setting position before being extracted (pulled out 2 clicks). Use a 1mm screw-driver, avoid using tweezers or any other tool with a point because this could jam the setting lever and damage the setting lever spring.
Examples of the SW200:
Pictured is the SW200 in an Invicta Ocean Ghost Diver. There are many models with this movement, please comment below if your watch has it and tell the Caliber Corner community what you think of it.
Additional Resources:
Trending Comments
Sellita Caliber SW200 VS SW200-1
Wow man, you should join the R0l3X club, they're desperately looking for new members, but…
Sellita Caliber SW200 VS SW200-1
Basically you are saying that one of the world's most used workhorse movements is complete…
Seagull Caliber ST1902
I assembled Speedmaster homage with that movement a couple weeks ago and tonight I am…
TAG Heuer Caliber TH20-00
How's that accuracy holding up now? Going to pick up my Reverse Panda next month,…
Seiko Caliber 7S26
Dont need to call the seller a fraud but just plain ignorant. The 7s26 always…
Active Caliber Listings
Tengo un mondaine big date que al cambiarle la batería dejo de funcionar la verdad…
Hi Joe, sounds like they were just back-ratcheting while manually winding. As for the rotor,…
"The rotor winds in both directions to reduce winding time." I've seen a video showcasing…
I looked at a 2007-2009 M832118 When I went to set the time clockwise rotation…
How's that accuracy holding up now? Going to pick up my Reverse Panda next month,…