Omega Antimagnetic Dust Cover Shield 096fe0041

Anti-Magnetic Dust Covers

Omega Antimagnetic Dust Cover 096 Fe 0041

This is an anti-magnetic dust cover or shield that can be found on some solid back Omega Speedmaster and Seamaster watches. It is sometimes called a movement cover, dust cover, dust cap, movement shield, etc. It serves the purpose of adding a layer of antimagnetic protection between the movement and the caseback. Its presence doesn’t mean your watch will be 100% resistant to magnetic fields, but it helps.

Cover Example:

The dust cover example shown here was found in a Seamaster GMT, covering an Omega caliber 1128 automatic movement.

The covers are not signed with Omega branding, so without prior knowledge that it is from an Omega watch, a person could come across this part and have no idea what it is for.

Omega Antimagnetic Dust Cover Shield 096fe0041

This particular cover has just two lines of text that read:

ANTIMAGNETIC IRON

096 FE 0041

The number is a reference number for this part. Other part numbers include 096 FE 0037 (096FE0037), 096 FE 0028 (096FE0028). If you know of more, please comment below.

Example Specs:

The dust cover pictured measures about 27.7mm in diameter, at ~2.3mm tall with a weight of around 1 gram.

It fits snugly in place over the movement, with tight tolerances giving the ability to rotate it in place but not move it.

The “knob” popping up in the center has a diameter of roughly 2mm (other models have a larger diameter knob).

Omega Antimagnetic Dust Cover Shield 096fe0041 Inside

My watch doesn’t have a cover!

If your watch doesn’t have a dust cover inside, first make sure it is supposed to have one before freaking out. If it is supposed to have a cover but it’s not there, it’s possible that a previous watchmaker or technician forgot to put it back in, or someone took it out to use in another watch. You can find replacements online with prices varying from $30 USD to over $100 USD.

Why use an anti-magnetic cover?

Protecting a movement from magnetism ensures accuracy and proper timekeeping. Here what Omega has to say about magnetism and its affect on timekeeping:

“When parts are mag­netised they become attracted to one an­other and rather than run smoothly they attempt to adhere together. Makers of quality timepieces realised early on that it was possible to mitigate some of this issue in the gear train by crafting move­ment parts from non-ferrous materials, as these metals and alloys enjoy antimag­netic properties due to their low iron con­tent. While crafting the movement plates and gear wheels in brass alleviated the is­sue a little, the one part that was always necessary to make of steel was the hair­spring, steel being the only material avail­able from which to produce reliable and long-lived springs. By the mid 1800s,watchmakers were already hard at work searching for a spring material that would not be affect­ed by magnetic fields, successfully exper­imenting with glass, palladium and gold. However, these materials proved too del­icate for prolonged use and the produc­tion of the parts in reasonable quantities was problematical for the technology of the times. It was not until the turn of the century that new alloys were discovered that combined both the flexibility and an­timagnetic properties required, paving the way for the first commercially avail­able ‘antimagnetic’ pocket watch to be launched in 1915.” –source

Faraday Cages:

You may see this dust cover referred to as a Faraday cage, but that isn’t accurate. Perhaps the dust cover can be regarded as a type of Faraday shield, but unless the movement is surrounded on all sides, then it is not exactly a cage.

“Faraday cages were invented in 1836 by English scientist Michael Faraday to block electric fields by using conductive materials to pass the force around the outside of the cage, protecting the delicate equipment within.”

And…

“The design of the cage allows this protection due to the distribution of the effect of the field over the conducting material, cancelling the effect of the field inside the cage.”

Omega also adds that:

“Faraday cages cannot block static or slowly varying magnetic fields (e.g. the Earth’s magnetic field), they can effectively shield the interior if the encasing conductor material is thick enough, and if any voids in the mesh are significantly smaller than the electromagnetic radiation’s wavelength.” -same source as above

If the material should be conductive, is iron suitable for the purposes of the cover?

According to metallurgists, yes…

“Iron has metallic bonds which is where the electrons are free to move around more than one atom. This is called delocalization. Because of this, iron is a good conductor.” –source

Not Just Omega:

Omega isn’t the only brand that uses antimagnetic covers. Below is an example of a Victorinox Swiss Army Journey 1884 quartz watch with a similar cover.

Victorinox Swiss Army Journey 1884 Anti Magnetic Cover

If you know of other brands using similar type covers/shields on their watches, please add them in the comments below…

Additional Resources:

Seagull Caliber St19

Join our mission to spread movement awareness!

Members Online

  • keepthetime Watchneverdie

Recent Forum Posts

Trending Comments

ggibby
2

Slava Caliber 2427

Lum-Tec gave up trying to fix my C2 with this movement, now I'm trying to…


keepthetime
2

Seiko Instruments (SII, TMI) Caliber NH34

Hi mrdibujante, from the specs chart above: "Rotor Direction: Bi-directional (Magic Lever)" indicates that it…


2

Citizen Caliber 8210

Es más preciso de lo que anuncia. Unos 12 segundos se adelanta al día, para…


1

Ingersoll Caliber 520

Mine is weird. It doesn't like to be fully wound. It looses seconds if I…


admin
1

Seiko Caliber 7009

Thank you, Arash. Listing updated.


Sponsors

0
Would love your thoughts, please comment.x
()
x